 |  |  |  |
| | 19JPC | 19JA | 19JC |
| Measuring range | 200×100MM | 200×100MM | 200×100MM |
| Scale value(digital display readout) | 0.0005MM | Projecting readout 0.001MM | 0.0005MM |
| Aiming microscope | Lift travel 120MM/arm inclined range±15°/scale value 10' | Tilting range of the vertical column ±15° separately /scale value 1' | Rise and down travel 120MM/Tilting range of the vertical column ±15° separately / scale vaule 10' |
| Goniometer eyepiece | Scale value 1'/ range 360° | Scale value 1' | Scale value 1'/Range 360° |
| Profile eyepiece | Measuring range±7°/scale value10' | Scale value 10' | Measuring range ±7°/scale vaule 10' |
| Optical dividing head | Scale value 1'/range 360° | Scale value 1' | Scale vaule 1'/Range 360° |
| Dimention of glass working stage table-board | 215×130MM | 215×130MM | 215×130MM |
| Centre cradle maximum holding diameter and length | Φ100MM/sample diameter≤55MM 750MM/sample diameter＞55MM 600MM | Φ100MM/measured diameter≤55MM 750MM/measured diameter＞55MM 600MM | Φ100MM/measured range≤55MM 750MM/measured diameter＞55MM 600MM |
| High centre cradle maximum holding diameter and length | Φ80MM/600MM | Φ80MM/600MM | Φ80MM/600MM |
| V-bracket adjusting range of the left right front and back | Before and back 5MM/up and down 15MM 3MM | Front and back 5MM/up and down 15MM 3MM | Before and back 5MM/ up and down 15MM 3MM |
| Maximum load | 40KG | 40KG | 40KG |
| Basic function of 2D measuring program | Single coordinate/midpoint coordinate and half-length/three or four-point measure the round center coordinate and r d/intersection point and included angle of two lines/arc and beeline intersection point/intersection point of arc/two points beeline coordinate/the distance from point to beeline and beeline inclinded angle/the position of beeline in coordinate | | |
| Auxilary function of 2D measuring program | Sample chart/printing control/polar coordinate measuring/inch measuring/memory operation/teaching function/slide seat error correction | | |
| Expanded function of 2D measuring program | Roundness measuring/linearity measuring/cam measuring | | |
| Accessory | Optical rotary table / Imaging system | Division value of optical dividing table /Imaging system | Division value of optical dividing table / Imaging systwm |
| 產地 | China | China | China |
| | 
或電話：
021-65730171 |
或電話：
021-65730171 |
或電話：
021-65730171 |